Skip to Content

5 Valve Locations in Downhill Jam Tony Hawk’s Pro Skater 1 + 2

5 Valve Locations in Downhill Jam Tony Hawk's Pro Skater 1 + 2

For the Downhill Jam level on Tony Hawk’s Pro Skater 1 + 2, there are five total valves we need to open for one of the challenges. The valves are spaced out evenly throughout the map, but they can be easy to miss if you’re not paying attention. Here are all 5 Valve Locations in Downhill Jam in Tony Hawk’s Pro Skater 1 + 2.

5 Valve Locations in Downhill Jam Tony Hawk’s Pro Skater 1 + 2

The valves are pretty easy to spot, and they look like water valves. You can find the first valve on top of the two pipes in the starting area. Jump up to the from the ramp, and grind across the rails to open it.

Make your way down the course a bit, past the first ramp. The very next ramp has a valve on the top of it, so be sure not to go too fast, or you might miss it. Ride over it to open it, and make your way down the course.

A little further down the level, you will see a rail that runs across the two sides. Grind your way across it to open the third valve. Make sure to take it slow from here, because the next one is easy to miss.

Look for a big orange “Steer Clear” sign, and you will find the fourth water valve on top of it. There’s a ramp that leads up to it, but going at full speed will make you jump over it. Try slowing down a bit, and then hit the ramp. In case you go passed it, hold back to powerslide and come to a complete stop so you can turn around.

The final valve is at the very last hill of the map. Stay on the left side of the course, and when you get to the very last ramp, you will see the valve on the right wall.

Those are all 5 valve locations in Downhill Jam Tony Hawk’s Pro Skater 1 + 2. Check out the video below if you are having any trouble or prefer a walkthrough in that format. Good luck!

Back to Navigation